Capacitor connection diagram for starting the engine

Please give the connection diagram of the capacitor to an induction motor and advise its capacity. Engine 50HZ; 0.37kw; 1.62 / 09A (220/380).

Loading...

One comment

  • Admin

    Good afternoon! Attached to the comment three schemes.
    a) Star. Advantages: easy connection, relative symmetry of currents in the windings. Disadvantages: the electric motor is able to use only a third of the rated power (hence it is possible to develop only a third of the moment, respectively) The working capacitor can be calculated by the formula: Cp = 2780 * (If / Uf). Starting capacitor is calculated by the formula Cn = 2.5-3 * Cf.
    b) Triangle. Advantages of the circuit: windings operate at rated voltage, the motor is able to develop power close to the nominal. Disadvantages: lack of current symmetry in the windings, a sufficiently large capacitor is needed, the starting torque does not exceed 0.4 nominal. The formula for calculating the working capacitor: Cp = 4800 * (If / Uf). In this case, Cn = 2.5-3 * Cf.
    c) Incomplete star. Pros: the power can reach a value close to the rated one, the starting torque is higher than the rated one, symmetry of the currents in the windings can be achieved. Disadvantages: not all capacitors are suitable for connecting the motor, the complexity of connecting the circuit, Cp = 2780 * (If / Uf) In this case, Cn = 2.5-3 * Cf.
    I recommend that before choosing one of the schemes to read in more detail about it on the network, there are many nuances that can not be described in one comment.

    To answer

Add a comment