Overview of the characteristics of the energy meter Energomera CE6803V

Electric meter ЦЭ6803В is a device with the help of which electric energy is calculated in alternating current circuits. The manufacturer of the product is the Energomera concern. Such a device is in great demand in the market of devices for accounting and control of electric energy. In this article we will consider the technical characteristics of the CE6803B counter, as well as its dimensions and additional parameters.

terms of Use

The design requires certain requirements for use and has its own operating conditions:

  • air temperature at the meter installation site should be from - 40 ° С to +60 ° С;
  • the average humidity should not cover 98%;
  • install an electric meter in a room or in a place where there is no environmental impact.

The appearance of the Energy Meter CE6803V is depicted in the photo below:

Electric meter Energomer

Labeling Explanation

GOST is indicated on the front panel of the product, according to which it is produced and published. Each series has certain technical characteristics and requirements for use. All this is indicated in the labeling of the device.

The figure shows in more detail what each letter or number on the structure means:

Cipher

So, for example, the counter “Energomer” of the model ЦЭ6803В / 2 1Т 110В 1-7,5А 3ф.4пр. M6 Ш33 reads as follows: the number 2 is the accuracy class, 1T means that the device is single-rate; 110V - indicates that the device has a rated voltage of 110V; 3ph. 4pr. - This is a connection diagram; M6 denotes the type of reading device (mechanical six-digit); Ш33 - type of housing and method of fastening the product, in this case counter setting produced on the visor.

Design Features

The energy meter of the Energomer, by the principle of operation, has no special differences from other models of this type. But there are technical characteristics that distinguish the CE6803B from their own kind.

How is the metering and reading of electricity data? Data voltage and input current are multiplied and formed into pulses. The frequency of the pulsed signals will be proportional to the input power. In this case, the summation of the pulses is generated either by a microprocessor or by an electromechanical counter. This is exactly what the accounting of active electric energy shows. On the screen of the product ЦЭ6803В these indicators are highlighted.

Indications

The CE6803B counter has certain differences in design. For example, it is the ability to connect to test devices through the terminal box. For this, separate terminals are deliberately inserted. Their designation depends on the model of the device. In addition, the CE6803V counter has a non-volatile memory, which is very convenient. For example, if there is no electric power supply, the device will display the latest data, as well as the date, time and tariff.

There are 2 indicators on the front of the device.When the product is connected to the mains, voltage is transmitted to it and the “Network” indicator lights up. When a load appears in the network, the load indicator starts flashing and the reading starts.

In case of a non-working “Network” indicator, it is necessary to understand the cause of the breakdown. This may be due to poor contact of the wires to the terminals or the indicator itself has broken. If the Energomera meter fails, it is better to return it to a service center for repair.

The figure below shows the overall dimensions (drawing) of the CE6803V device:

Dimensions Energomer

Main and additional characteristics

Technical characteristics of the CE6803V electric meter:

  • measuring network frequency: 50 - 60 Hz;
  • accuracy class: 1 or 2;
  • the counting mechanism complies with GOST 30207;
  • the table below shows the number of decimal places and gear ratios:Parameters

The main and additional specifications are listed in the table below:

Feature table

 

Reliability parameters:

  1. Verification of the device is carried out after its release from production, after repair and during operation. Intertesting interval is 16 years.
  2. The average life of the device is up to 30 years. The electric meter of the Energomera TsE6803V has not only important technical characteristics, but also an affordable and affordable price. Therefore, they are very popular.
  3. The meter has a warranty period of 4 years from the date of issue.

Finally, we recommend watching the video, which provides an overview of this model of the meter:

So we examined the main technical characteristics of the CE6803V counter. We hope the information provided was interesting and useful for you!

Recommended reading:

(4 votes)
Loading...

Add a comment